50A Scratch Start Touch Arc Plasma Cutter Dual Voltage 110V/220V 1/2" Inch Cut

Description

50A Scratch Start Touch Arc Plasma Cutter Dual Voltage 110V/220V 1/2" Inch Cut
NEW Plasma Cutter 50AMP DC Inverter Dual Voltage 110V/220V. The plasma cutter was beautifully designed to cut stainless steel, alloy steel, mild steel, sheet metal, copper aluminum as well as other metal materials.
Features:
Plasma Cutter 50AMP DC Inverter Dual Voltage 110V/220V
Torch Design Provides a Sure, Comfortable Grip Made from Heat and Impact Resistant Material
Cut Up to 1/2" Inch Thick Steel with the High Performance Cutting Torch
Non-Pilot Arc Torch Provides a Longer Life for Consumables
High Cutting Performance Due to the Advanced Inverter Technology
Specifications:
Input Current: 20-40A
Output Current: 15-50A
Input Voltage: 110-220V, 1-PH, 50/60Hz Dual Voltage
Cut Thickness:
8mm Thick Steel (Optimal Cut)
10mm Thick Steel (Maximum Cut)
12mm Steel (Severance Cut)
Air Supply: Clean, Dry, Oil-Free Air
Required Air Flow Rate: 0.6-0.75Mpa 3.0scfm @ 70PSI
Duty Cycle: 35% @ 40°(104°)
Color: Blue
Material: Stainless Steel, Mild Steel, Aluminum, etc.
Brand: Biltek
Condition: 100% Brand New
Important Please Read: You will need to have your own air supply from an air compressor.
Plasma cutter includes a standard US 110V plug, to reach the 50A cut specs you will need to connect a 220V plug.
Package Includes:
1x Plasma Cutter Power Supply
1x Cutting Torch
6x Replacement Consumables:
2x Nozzle Tips
2x Electrodes
1x Ceramic Cup
1x Ceramic Ring
1x Ground Clamp
1x Air Filter/Regulator
1x Air Hose
4x Hose Clamp
2x Air Connectors
1x User Manual
California Customers:
⚠️
WARNING!:
This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov
Product names, logos, brands and other trademarks referred to within our products and services are the property of their respective trademark holders. These trademark holders are not affiliated with us, our products, or our website. They do not sponsor or endorse our materials.
This Product is intended for off-road use only. We cannot be held liable if the product is used in conjunction with any vehicle on U.S. or Canadian roads or highways or in any other jurisdiction where the Product would not meet safety or emission standards, as specified by that jurisdiction. The person, individual or entity that purchases or installs or uses the Product in a vehicle, (the “Customer” or “you”) in any situation, assumes any liability arising from any negligent, grossly negligent, reckless, willful or wanton use of the Product in a manner not explicitly ascribed or condoned by the Company.