Chevrolet 1937-1954 Car Truck 12V Conversion kit foot pedal starter

Description

1937 through 1954 First Series Chevrolet Cars Truck 6v to 12v Conversion, Inline (6) six cylinder 216, 235 1st series engines with foot pedal start.
Kit includes: 100 amp GM CS130 Alternator,  Alternator Bracket, Mounting Hardware, Horn Relay, Coil, Gas Gauge Voltage Reducer, Excite Plug and 10 gauge output connection wire. Select between 3/8" and 5/8" pulley, to determine pulley measure the width of your generator belt.
Note: Our kit contains the best and easiest to install alternator bracket along with belt tension adjuster bar. The alternator bracket allows you to adjust forward and aft
to line up belt. Other types of brackets do not have this feature. Bracket comes with mounting hardware.
If you have a foot pedal manual starter this is the correct kit for you. If you have electric starter see other kit on ebay.
Kit contains the parts needed to convert your Chevrolet from 6 volts to 12 volts using an alternator and where the starter is operated by a foot pedal. If you have a key start
then see our kit that offers start solenoid that mounts on the starter.
Alternator options;  Chrome finish 3/8" or 5/8" pulley  ( our pulleys are all chrome for a finished look)
Measure the top of belt to determine the pulley size. Make sure you select the correct pulley when ordering we will install the correct size pulley before
shipping.
Instructions included in kit, warranty 1 year.
3/8" is narrow belt
CC-3754K-100-3
5/8" is wide belt
CC-3754K-100-5