EPEVER 60A Solar Charge Controller 12V/24V, 60 amp Solar Charge Regulator

Description

EPEVER 60A Solar Charge Controller 12V/24V, 60 amp Solar Charge Regulator
60 amp Solar Charge Controller: 12V/24V DC (Automatically detects systems voltage). Max.PV input voltage is 50V. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded
Positive Ground Charge Controller 60A: 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, Float; Multiple Load mode: Light control, Light Time control,Dual Time control
Solar Charge Regulator Built in LCD display design, dynamically displaying all operating datas and working condition; humanized button for more comfortable and convenient operation
Multiple protection against overcharge, over discharge, over load, short circuit, reverse polarity, over heat and battery under voltage;
Professional after-sales customer service, Heat sink design for achieving higher heat dissipation. Extensive electronic protection and battery temperature compensation function.
The VS-AU charge controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc. The features are listed below:
-Adopt high quality components of ST,IR and Infineon, make sure product using lifespan - 3-Stage intelligent PWM charging：Bulk, Boost/Equalize, Float
- LCD display design, dynamically displaying device's operating data and working condition
- Multiple load control modes: Manual mode, Light control
- Battery temperature compensation function(NOTE: Unplug the RTS, the temperature of battery will be set to a fixed
value 25ºC.)
- Extensive Electronic protection
- Energy statistics function
Features:
12V / 24V DC Auto
Rated charge current: 60A
Max Input Power:12V @ 720W | 24V @ 1440W
Max. PV open circuit voltage: 50V (45V at 25℃ temperature)
Battery type: Sealed(Default) / Gel / Flooded
3-Stage intelligent PWM charging: Bulk, Boost/Equalize and Float
Battery voltage range: 9V~32V C
USB output:5VDC/2.4A(Total) Terminals: 25mm2/4AWG
Net weight: 1.02kg
Wiring:
1. Please always connect the battery before connect the soalr panel, disconnect in reverse order. And pay much attention to the "+" and "-". 2. The battery fuse should be installed as close to battery as possible. The suggested distance is within 150mm.
Setting:
1.Accumulative power zero clearing: Under PV power interface, press SET button and hold on 5s then the value blink, press SET button again to clear the value.
2. Setting temperature unit: Under battery temperature interface, press SET button and hold on 5s to switch.
Package:
1* VS6024AU Solar charge controller
1* English manual
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.