Hypertherm Powermax 30 XP Plasma Cutter 088079 With Case, Gloves & Extras

Description

Hypertherm Powermax 30 XP Plasma Cutter 088079
Hypertherm Powermax 30 XP Plasma Cutter Overview
The Hypertherm Powermax 30 XP Plasma Cutter is a highly portable, 30 Amp, handheld plasma cutting system appropriate for a wide range of applications. It uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.
Hypertherm Powermax 30 XP Plasma Cutter System includes
Hypertherm Powermax 30 XP Power supply, 15 ft. (4.5 m) Duramax LT hand torch with standard consumables, 15 ft. (4.5 m) work clamp
240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits
Operator and safety manuals
Consumable kit with 1 standard nozzle, 1 electrode, 1 Fine Cut nozzle and 1 Fine Cut deflector
Plastic carry case
Carrying strap
Leather gloves
Shade 5 glasses
Hypertherm Powermax 30 XP Plasma Cutter Benefits
Easy to use
System includes everything you need to get you cutting quickly and easily
Small size and light weight let you take the Hypertherm Powermax 30 XP just about anywhere
Plug into any 120 or 240 V power (convenient Auto-Voltage technology and plug adapters included)
Superior performance in a compact package
Fast cutting speeds and excellent cut quality let you finish jobs quicker, with fewer secondary operations
Built to withstand heavy-duty use in the most demanding environments
“Two-in-one” design for maximum versatility
High-power cutting on thick metal
Fine Cut consumables enable high quality cuts on thin metal, leaving a clean edge and a narrow kerf
Cutting with 120 V input power
Use Fine Cut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:
6 mm (1/4") at 482 mm/min (19 ipm)
10 mm (3/8") at 203 mm/min (8 ipm)
12 mm (1/2") at 76 mm/min (3 ipm)
Hypertherm Powermax 30 XP Plasma Cutter Duramax LT torch
Designed to withstand impact and heat.
Twice the consumable life* and 70% more efficient on average for lower cost of cutting.
Hypertherm Powermax 30 XP Plasma Cutter Cutting with 120 V input power
Use Fine Cut nozzle and deflector for cutting at 120 V input power.  When operating at the maximum recommended output of 25 A, the cut capacities are:
1/4" at 19 ipm
3/8" at 8 ipm
1/2" at 3 ipm
Hypertherm Powermax 30 XP Plasma Cutter Operating data
Capacity
Thickness
Cut speed
Recommended
3/8"
20 ipm
1/2"
10 ipm
Severance
5/8"
5 ipm
Hypertherm Powermax 30 XP Plasma Cutter Cut Performance
Hypertherm Powermax 30 XP Plasma Cutter Specifications
Input voltages
120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW
120-240 V, 1-PH, 25-18.8 A
Output current
15-30 A
Rated output voltage
125 VDC
Duty cycle @ 40C (104F)
35%, 240 V
20%, 120 V
Open circuit voltage (OCV)
256 VDC
Dimensions with handles
14.0" D; 6.6" W; 12.0" H
Weight w/ 15 ft. torch
CSA: 21.4 lbs
Gas Supply
Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length
10 ft.
Power supply type
Inverter - IGBT
Engine drive requirement
5.5 kW for full 30 A output
Warranty
Power supplies have a 3-year warranty and torches a 1-year warranty.
*compared to Powermax30
*These machines are shipped Signature Required.  This is required by eBay and PayPal to protect both the buyer and the seller.