Loctite Circuit fast & easy to use repair kit for rear windscreen defogger 3863

Description

LOCTITE 3863
Circuit+™
Rear Window Defogger Repair Kit fast & easy REPAIR
1 PIECE
LOCTITE
3863 Circuit+™ is a complete, fast and easy to
use repair kit for rear windscreen defoggers.
It has high
conductivity due to its high silver content.
Directions for use:
1. Find the malfunctioning section of heating circuit (e.g. with
a multimeter to test for electrical continuity).
2. Disconnect the heating circuit from the source of
electricity.
3. Clean area to be repaired with Loctite
7063.
4. Remove protective film from the mask/stencil provided.
After use, the protective film can be put back on the
mask/stencil.
5. Put the stencil on the area to be repaired. The hole in the
stencil has to be in line with the heating wire. Press stencil
onto screen.
6. Shake bottle before use.
7. Apply the liquid in the stencil opening with the brush
provided. The complete area to be repaired needs to be
covered. Leave to dry for 5 minutes.
8. Repeat after 5 minutes. Apply a minimum of 3 layers.
9. Firmly close bottle after use and clean brush.
10. The stencil should not be removed until 30 minutes after
last application. Remove carefully.
11. The heating circuit can be connected to the power source
after 24 hours.