PLASMA CUTTER 15 TIP 50A PILOT ARC SIMADRE 3IN1 200A TIG MMA WELD FT PEDAL 520DP

Description

SIMADRE® POWER 3IN1 520DP 50A PILOT ARC CUTTER AND 200A TIG/MMA/ARC WELDER
BRAND NEW MODEL -  DUAL 110V/220V 520 PILOT ARC MODEL!!! - This unit comes with One Year Warranty
WITH HIGH-PERFORMANCE PILOT ARC CUTTING TORCH and FOOTPEDAL, AIR REGULATOR!!!
BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES!
THREE MACHINES INTEGRATED IN ONE
SIMADRE DUAL VOLTAGE 110/220V
200 AMP TIG, 200 AMP ARC/MMA and 50 AMP PILOT ARC PLASMA CUTTER !!!
• Foot Pedal
• 200 Amp Tig Torch
• 200 Amp Arc/MMA Welder
• Digital Current Display
• High Performance Cutting Torch
• Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.)
• Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm.
• Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span. See Picture Below !
• Advanced inverter technology means high cutting and welding performance.
• The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service
• Plasma Cutter is 3/4" rated with 1" severance cuts
• Tig Welder has a 5/16" weld thickness and a high frequency non-contact start.
• Arc/MMA Welder has a 3/16" weld thickness
• CE, CCC, CSA and ISO-9001 certification
Specifications:
Cutting Thickness:
·
3" Per minute at 1" Steel (Severance Cut)
·
7" Per minute at 3/4" Thick Steel
·
17" Per minute at 1/2" Thick Steel
Input voltage
AC 110/220±15%  50/60Hz
Input Power Capacitance
7.1 kva
No-load loss(W)
40
Duty cycle (%)
60
Power factor
0.93
Efficiency (%)
85
Insulation class
B
Protection class
IP21
TIG
MMA
CUT
Input current(A)
21
32
28.6
Rated output current
200A
200A
50A
Current range
15-200
15-200
20-50
No –load voltage(V)
62
62
250
Cut thickness(mm)
-
-
1-16
Arc-leading
HF
Touch
PA
Unit size: 21x8x11"
Unit weight: 32 lbs
Package weight: 55 lbs
It comes with:
• Pilot arc cutting torch.
• Tig Welding Torch (with long and short caps)
• Ground cable with clamp.
• Stick (ARC) Holder
• Initial Consumables
• User Manual
• You shall provide 60~70 psi air supply, 110v or 220v power plug for plasma cutting
• You shall provide argon regulator, tank for tig welding
Shipping to pr, ak, hi, guam and military stations outside usa will be charged extra per the location.
Signature confirmation available upon request at no additional charge