Plasma Cutter 50 Amp Dual Voltage 120/240v Blowback Pilot Arc CNC Ready

Description

Product description
Style:
NPC500 110/220V
NPC500, 50Amps CNC Plasma cutter, Blow back Non-HF Pilot Arc function.
Specification
Input voltage: AC 110/220V Dual Voltage
High Frequency: 50/60Hz
No Load Voltage: 48V
Rated input capacity: 4.8 KVA
Rated duty cycle: 60% at 50A, 100% at 40A
220V Cutting current range: 15A-50Amps
110V Cutting current range: 15-35Amps
Arc starting: Pilot Arc ( Blow back )
Quality cutting thickness: 14mm at 110v 60PSI
Max Cutting thickness: 20mm at 220V 65PSI
Insulation Class: B
Cutting torch length: 5M
Earth Cable Length: 2M
Packing dimension: 14.2*6.1*13 Inch
Standard Accessories
1 x Plasma Cutter (with 110V plug)
1 x Cutting torch
1 x Air Regulator (Air gauge fixed on front of machine)
1 x 110V to 220V power plug adaptor conversion cord
1 x 2.5M earth clamp
5 x electrodes for cutting torch
5 x tips for cutting torch
1 x 2M air hose
4 x Hose clamp
1 x manual
2 x CNC plug
About this item
CNC plasma cutter CNC port and Post time, The time for post air can be adjusted from 2-15 seconds adjust the time cooling torch head, this function can increase the life of the consumables, 2T/4T, AIR/CUT function also available at machine. Machine also with CNC function can easy work with CNC table
CNC plasma cutter machine, Blow-back, Non-HF, Non-Touch Pilot arc plasma cutter, It is not high frequency no interference. Machine is lightweight but powerful, machine can easy cut 14mm, Max severance cutting thickness 20mm with 70PSI under 220V in 60% duty cycle. This machine is excellent choice for home job and light business projects
Dual Voltage 110/220V, This is dual voltage plasma cutter, Input voltage is 110/220V, Machine auto indicate the input voltage 110V or 220V. Only need to plug the machine to 110 or 220V power source, Also the voltage will be shown at panel light of machine. 30 Amps power breaker is suggested on wall, output current is 50Amps quality cutting thickness is 10mm under 220V in 70PSI (0.6Mpa)
Cutting thickness, In 220V the quality cutting thickness is 14mm at 70PSI hands movement speed 275mm/min, Severance cutting thickness is 20mm at 70PSI. In 110V the quality cutting thickness is 10mm at 60PSI, Severance cutting thickness is 14mm at 60PSI. Suitable to cut stainless steel,Alloy steel, Mild steel, Copper, Aluminum. Beside we suggest the capacity of air compressor reach at 45L/min
Copper and aluminum, This Cutter plasma machine can cut copper and aluminum, but not in much thickness. We suggest 4mm for copper under 220V 65PSI, 6mm for aluminum under 220V 65PSI. Stainless steel 16mm at 220V 65PSI, Alloy steel 14mm at 220V 65PSI (0.55Mpa)