Plasma Cutter Tig / Arc Welder 50 / 200 Amps-- MASSIVE Inventory Reduction SALE

Description

The EpicWeld GTA5200D 3-in-one Combination TIG / Stick Welder & Plasma Cutter is a serious multi-function machine for the craftsman and professional both. The GTA5200D is a portable full featured three function machine including a Plasma Cutter, a TIG Welder and a Stick ARC welder with IGBT inverter technology weighing just 27 pounds. The GTA5200D TIG / Stick Welder & Plasma Cutter is capable of welding/cutting just about any type of metal and is the ideal tool for those in the metal fabrication and construction industries where machine portability is crucial. The GTA5200D TIG / Stick Welder & Plasma Cutter has an adjustable cutting current between 10A and 50A which makes it a must have in the automotive industry. Consumables are readily available and are a fraction of the cost of traditional product lines saving you many thousands of dollars in the long run. All IGBT power transistors are manufactured by either FUJI or TOSHIBA of Japan, chosen for their reliability and longevity in the toughest of environments. With a 3 year parts and labor warranty to back your purchase you will enjoy many years of reliable cutting operations. Machine comes pre wired to accept our foot pedal control ( separate purchase ).
MACHINE IS DUAL VOLTAGE BUT COMEs WITH ONLY THE PLUG SHOWN IN THE PHOTOS. To connect to 120 volts you will need to either change the plug or make/purchase an adapter.
Features and Performance
What Is In The Box
Light weight machine only 27 pounds
EpicWeld GTA5200D TIG / Arc / Plasma Cutter
Handy rigid carry handle for site work
PT-31 Plasma Cutter Torch & 14.5 Ft Cable
Requires only 70 psi for cutting
w/5 extra plasma electrodes
Easy hand cutting of all conductive metals
w/5 extra plasma nozzles
Start push button handle mounted switch
w/5 extra plasma ceramic shield cup sets
TIG w/ high frequency non-contact start
WP17 TIG Torch & 14.5 Ft Cable,
Digital amperage display
200 amp Arc holder w/ 9.5 ft of cable
Auto input voltage & frequency sensing
8.5 foot ground cable & ground clamp
Thermostatically protected cooling fan
Air filter/regulator
IGBT Transistor circuitry
Air hose
Great arc stability
2 hose clamps
High cutting performance
Air filter/regulator w/mounting bracket
State-of-the-Art semiconductor circuitry
Owners manual
User-friendly amperage output control dial
A full three year parts and labor warranty
Specifications
Weight
27 pounds
Dimensions
length = 17 inches
width = 8 inches
height = 12.5 inches
Type
DC Arc / Stick Welder & Plasma Cutter
Max Input Amps
16.3 (transient: 27.1)
Power Requirement (Volts/Hz)
120/220 Volts 50/60 Hz
+/- 15%, Single Phase
Rated Output Amperage @ 110 Volts
TIG: 10-100 Amps
Stick: 10-80 Amps
Plasma: 10-25 Amps
Rated Output Amperage @ 220 Volts
TIG: 10-200 Amps
Stick: 10-160 Amps
Plasma: 10-50 Amps
Rated Output Voltage
TIG: 18 Volts
Stick: 27.5 Volts
Plasma: 110 Volts
Max Rated Welding/Cutting Thickness
TIG: 5/16 inch
Stick: 3/16 inch
Plasma: 3/4 inch [1 inch sever]
Method Of Cooling
Fan – Always On
Duty Cycle @ 60%
TIG: 200 Amps
Stick: 160 Amps
Plasma: 50 Amps
Duty Cycle @ 100%
TIG: 150 Amps
Stick: 120 Amps
Plasma: 40 Amps
Efficiency
0.85
Air Requirement
Plasma only: 60-70 PSI at 4 CFM
Air Flow
TIG: 2-5 Liters/minute
Stick: n.a.
Plasma: 80 Liters/minute
Housing Environmental Rating
IP21
Insulation
B
Foot Pedal
Ready – Foot Pedal Not included