Romondes EVAP Smoke Machine Automotive Leak Detector Vacuum Diagnostic Tester

Description

Romondes EVAP Smoke Machine Automotive Leak Detector Vacuum Diagnostic Tester
About Productor
I’m Romondes SM601 automotive smoke machine, come with a hook allows you to hang me on your hood latch, conical adapter fits most intakes,
and the 8.2ft smoke hose can help reach and connect perfectly, won’t harm the EVAP system. More Details about me - My Voltage: DC 12V. MY Smoke output pressure:0.5PSI.
My Smoke output volume: ＜8LPM. My Smoke current: 5 AMP. Heating Material: Mineral Oil or Baby Oil (oil not included).
【Powerful and Easy to Use】
1: Mount the hook and the shop air adapter, plug the power and screw on the smoke hose to the unit.
2: Fill (mineral Oil based)
smoke oil into the unit from refill port on the top. (Note: The oil level shall not exceed the level gauge)
3: Connect shop air supply and 12V vehicle power, introduce shop air to the unit,
then turn the Flow Dial anti-clockwise to open the air flow. 4: Switch on the power, after the unit start to output smoke, introduce smoke into the system.
【Diagnose All Types of Leaks】As a professional smoke leak detector, I can help you to locate hard-to-find leaks in any sealed system, like EVAP system, crankcase system test,
intake/exhaust system test, sealing test, fuel tank system test, turbo test, EGR system test, vacuum leaks test, various pipe fittings test Throttle Shafts, EGR valves, Hoses,
Brake Booster, Door&Windows seals, Oil Leaks ... and more! And I Could be used on all cars, motorcycles, snowmobiles, ATV, light trucks, boats, etc.
【Advanced, Precise, Efficient 】 I'm a good assistant of car code reader. Normally, 60% of engine fault codes are related to pipelines. Adopt the most advanced fifth generation technology,
I can help you quickly and accurately determine whether the fault is caused by pipeline leakage, and detects even the smallest leak. I can output the smoke within seconds,
improve the efficiency of diagnose dramatically. More importantly, the smoke output by me is enviroment friendly and non-hazard.
▶Romondes offers 12-month warranty, full hassle-free refund or replacemen.
so that we can ensure you a happy shopping experience. If you have any questions, feel free to contact us via message.
How SM601 Smoke Leak Detector Was Born?
Have you met some troubles like below when using an smoke machine automotive?
- "Smoke turns to liquid almost instantly inside whatever you are testing"
- "The smoke is very thin, impossible to see and find leaks"
- "Fluid leak cause catastrophic engine damage"
After five generations of technological innovation, SM601 Smoke Leak Detector was born. Avoiding all the disadvantage of past technologies, SM601 has these advantages:
Easy to Use:
With easy-use function and portable design, the hook allows you to hang it on your hood latch, and conical adapter will fit most intakes.
Powerful and Durable:
The third-generation technology uses heating wire and wick cotton, needs to be replaced frequently and the smoke has a peculiar smell. The fourth-generation technology uses ceramics heating, it's very fragile during transportation and use. SM601 auto smoke machine avoids these shortcomings, as a durable smoke detector, it also saves you a lot of money.
Output Smoke in Seconds:
Output lots of smoke within 30s to detect the leaks in pipe system, reducing diagnostic time dramatically.
Safe for All Vehicles:
Protect vehicles from high pressure damage, also avoid fluid leak cause engine damage.
How To do leakage Test with SM601 Automotive Smoke Machine?
Step1
Mount the hook and shop air adapter to the SM601 smoke leak detector, plug the power cord into the socket.
Step 2
Fill (mineral Oil based) smoke oil into the SM601 auto smoke machine, from refill port on the top.
Note:
The oil level shall not exceed the level gauge.
Step 3
Connect shop air supply, connect 12V vehicle power, introduce shop air to the SM601 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then SM601 smoke machine automotive will start to generate smoke.
Step 4
In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
Professional Full System Leak Detector, Won't Miss Any Leaks.
Romondes SM601 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help you to locate hard-to-find leaks in any sealed system, such as Cooling System Test, Car Sealing Test, Throttle Shafs, Engine Block Test, Intake System Test, Exhaust Systems Test, Crankcase system test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test, etc.
Car Sealing Test:
Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof ,etc.
Fuel Tank System Test:
When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, i
t can cause leaks in the fuel tank system.
Exhaust System Test:
Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Intake System Test:
Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
EVAP System Test:
Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
Crankcase System Test:
Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
Turbo Test:
The leakage of coolant would cause the engine to report high water temperature.
Various Pipe Fittings Test:
Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
With the superb design, the SM601 leak detector can out put smoke within seconds and discover leakage holes as small as 0.2mm. Adopts the principle of isolated heat conduction, the smoke created from the machine is non-toxic. To ensure the safety of people and vehicles, the engine does not need to be ignited during use. Unlike the traditional method of using soapy water, only the upper half of the complex pipeline can be tested, cars are tested for all-round pipeline leakage.
Output pressure: 0.5PSI
Output Volume:< 8LP M
Power Supply: DC12V
Current: 5AMP
The flow meter indicates the leak size:
For DTC P0456, the meter should be at0.1 LPM.
For DTC P0442, the meter should be at0.5 LPM.
Overheat & Anti-frost Protection
SM601 EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 75°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation.
Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.
What's in the Package?
Packing List:
1*Main Unit
1*Smoke Delivery Hose
1*Power Cord
1*Hook
1*Intake Adapter
1*Shop Air Trunk (USA)
1*EVAP Service Port Adapter
1*EVAP Removal Tool
"0" Risk Purchase
To ensure your high-quality shopping experience, Romondes provide12-month w-arranty. If you have any questions, feel free to contact Romondes team via Amazon message.
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with automotive diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PAYPAL only !
Delivery details
1.
Shipping terms: Int'l Express/ Registered Air mail
2. Shipping address supplied by Paypal is acceptable.
3. After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend)
4.
If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!
Terms of sales
Please do not hesitate to leave us your positive feedback if you are happy with your shopping. if you are unsatisfied with your purchase, please do not leave us negative or neutral feedback before contacting us, we will resolve the trouble for you.
About us
If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you.
Contact us
You may reach us by using the Contact Seller button right below the Seller Information.
Our business hour is from 10am to 7pm pacific time. Monday - Friday, closed on major holiday and weekend.